With a roomier air-conditioned cabin and excellence performance options, the Bobcat E34 is neweset allstar in the fleet.
Machines in one range are compared against each other — these are the four figures the choice usually comes down to.
A conventional tail swing in a machine just 1,550 mm wide: for demanding work where performance has to be combined with compactness.
| Operating weight | Power | Bucket digging force | AUX1 flow | |
|---|---|---|---|---|
| E34this model | 3 476 kg | 18,2 kW | 33 430 N | 63,9 l/min |
| E35z | 3 499 kg | 18,2 kW | 33 430 N | 63,9 l/min |
Source: B4501110-EN (12-2019)
The design decisions that determine where the machine can work and what you can hang on it.
An extension of zero tail swing: the front corners of the upper structure are brought inside the swing circle too, and the boom swing cylinder does not protrude when digging parallel to a wall. In practice the machine works right up against obstacles — in backyards, in urban areas and anywhere a bigger machine simply will not fit.
The blade follows the ground automatically, making levelling quicker and easier. The travel motor returns to high speed by itself after downshifting under load, so turns and dozing stay smooth without manual shifting.
The whole range side by side — you can see what each step up actually buys.
| E34 | E35z | |
|---|---|---|
| Operating weight with cab and bucket (ISO 6016) kg | 3 476 | 3 499 |
| Transport mass (no attachment) kg | 3 312 | 3 335 |
| Weight reduction with canopy kg | −118 | −118 |
| Additional weight for cab with HVAC kg | 19 | 19 |
| Additional weight for steel tracks kg | 96 | 96 |
| Additional weight for long dipperstick kg | 12 | 12 |
| Additional weight for heavy counterweight kg | 291 | 291 |
| E34 | E35z | |
|---|---|---|
| Engine | Kubota / D1703-M-D1-E4B-BC-2 | Kubota / D1703-M-D1-E4B-BC-2 |
| Fuel and cooling | diesel / liquid, forced circulation | diesel / liquid, forced circulation |
| Number of cylinders | 3 | 3 |
| Displacement cm³ | 1 642 | 1 642 |
| Maximum power @ 2,200 rpm (ISO 14396) kW | 18,2 | 18,2 |
| Maximum torque (SAE) Nm | 97,4 | 97,4 |
| E34 | E35z | |
|---|---|---|
| Pump type | single outlet variable displacement, load sensing torque limited pump with gear pumps | single outlet variable displacement, load sensing torque limited pump with gear pumps |
| Total hydraulic capacity l/min | 101,2 | 101,2 |
| Auxiliary flow l/min | 63,9 | 63,9 |
| Auxiliary relief bar | 206 | 206 |
| E34 | E35z | |
|---|---|---|
| Digging force, dipperstick (ISO 6015) N | 20 790 | 20 790 |
| Digging force, long dipperstick (ISO 6015) N | 18 010 | 18 010 |
| Digging force, bucket (ISO 6015) N | 33 430 | 33 430 |
| Drawbar pull N | 34 132 | 34 132 |
| Travel speed, high range km/h | 4,7 | 4,7 |
| Travel speed, low range km/h | 2,6 | 2,6 |
| E34 | E35z | |
|---|---|---|
| Boom swing, left ° | 75 | 75 |
| Boom swing, right ° | 55 | 55 |
| Slew rate rpm | 8,6 | 8,6 |
| E34 | E35z | |
|---|---|---|
| Cooling system l | 8 | 8 |
| Engine lubrication plus oil filter l | 5,2 | 5,2 |
| Fuel tank l | 52 | 52 |
| Hydraulic reservoir l | 8,3 | 8,3 |
| Hydraulic system l | 39,7 | 39,7 |
| E34 | E35z | |
|---|---|---|
| Noise level LpA (2006/42/EC) dB(A) | 77 | 77 |
| Noise level LWA (2000/14/EC) dB(A) | 94 | 94 |
| Whole body vibration (ISO 2631-1) m/s² | 0,11 | 0,11 |
| Hand-arm vibration (ISO 5349-1) m/s² | 0,34 | 0,34 |
Source: B4501110-EN (12-2019)
Grouped by machine system, per the brochure table.
TOPS meets ISO 12117, ROPS meets ISO 3471, FOPS meets ISO 3449.
Machine
